Campervan Complete Wiring Kit for Vehicles with Smart Alternators (and Stop Start Vehicles) with Battery to Battery Split Charge Kit

Description

This kit is designed so you have everything needed to wire your campervan and includes the following:

1 x Fuseboard with a 30mA RCD, 1 x 16a MCB and 1 x 6a MCB and a spare way should you want to expand the electrical system in the future

1 x Coil of 2.5mm arctic flex 10 meters long to be used on the sockets

1 x Coil of orange flex 1.5 meters long to be used on the hook up point

1 x 1 meter 2.5mm chassis bonding cable with a lug pre crimped on the end and a m6 bolt with 2 nuts

1 x Surface 16a socket or recessed panel mounted socket (please let us know when ordering)

5 x 20mm stuffing glands

2 x Double socket and strong surface back box

1 x A hand full of cable clips

20 x Cable tie bases and cable ties

1 x 20m of 12v 2 core cable

1 x 6 way 12v blade fuse board

2 x Directional 12v LED lights

4 x  LED downlights

1 x Camper switch control panel with 5 12v switches, description labels, volt meter, USB charger and auxiliary 12v socket

1 x Battery to battery split charge kit (suitable for Bluemotion VW T6 etc)

2 x Quick release battery terminals

1 x 12v 8A smart leisure battery charger

1 x 10m 16A hook up lead with PAT test label (this can be made with a 13a plug on rather than a 16a commando if requested)

1 x Roll of electrical tape

1 x Selection of cable crimps and connectors

When buying this kit we offer full after sales advice, we understand that not everyone is an electrician, we have installed these in hundreds of vans so will have come across the queries you may have and will be able to help. We can send advice videos and pictures to assist you as well.

(Please note the brand and appearance of materials available may change slightly but will still be of a high contractor quality)